2/15/2023 0 Comments Proface compulsion transfer mode(1) Check that the UDP port number in does not overlapp with the UDP port number in. TCP port number of the display unit side is overlapped, or the device/PLC is reset during communication. (Driver Name): TCP port number ***** is overlapped, or it is not completed to close the last TCP connection Please check the port settings in GP-Pro EX's. (Driver Name):(Port Name) Cannot use the portĪn error occurred when two or more driver types are selected to an identical COM port. If it does, please check if the Display Type settings in the GP-Pro EX editor are correct. Please check if the display unit supports Ethernet. (Driver Name): This machine does not have any Ethernet interfaceĪn error occurred when a Ethernet driver is selected in GP-Pro EX as the, but the project is transferred to a display model which cannot use Ethernet. (Node Name):(Port Name) Received data has been framing error If Memory-Link method is used, please check if the Data Length/Parity Bit of host side and the display side have the same settings. Please check the noise suppression and connector's insertion. The cause could be the noise or loose connection. (Driver Name):(Port Name) Received data has been parity errorĪn error occurred due to a lack of receiving data.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |